Digitus Ventilation Unit for variable 483 mm (19") installation

Cisco CAB-L400-20-TNC-N= coaxial cable LMR-400 6 m Black Accessories

Cisco pays special attention to its network accessories which are the foundation stone of the whole network system. Cisco cables, adapters and other accessories will never let you down and you can always rely on the superior quality and outstanding reliability. Cisco has a wide range of network cables that will fit even the most extraordinary demands.

Cisco Power Cord/AC Italy 3 m Accessories

Power Cord/AC Italy.

Cisco ANT-4G-OMNI-OUT-N= network antenna Omni-directional antenna N-type 3.5 dBi Accessories

The Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular antenna is designed to cover domestic LTE700/Cellular/PCS/AWS/MDS, WiMAX 2300/2500, and GSM900/GSM1800/UMTS/LTE2600 bands and is supported on the Cisco CGR 2010, 1240, and the 1120 routers. The Omnidirectional Outdoor Antenna is compatible with Cisco 2G, 3G, and 4G cellular devices that use a Type N connector and requires a mast-mounted outdoor antenna.

GRWIC-4G-LTE-EA= Accessories

StarTech.com Wall-Mount Server Rack with Built-in Shelf - Solid Steel - 8U Accessories

Mount your server, network and telecom devices to the wall, while storing your non-rackmountable equipment on the built-in shelfThis wall-mount rack provides 8U of space for mounting your servers or A/V equipment to a wall. The rack also has a built-in shelf to create a sturdy surface for storing equipment that is not rack-mountable.Customize your setupThe wall-mount bracket features an adjustable mounting depth of 12 inches to 18 inches as well as a dual-position 12 in. shelf that can be at either the top or the bottom depending on rack's positioning. These two features allow you to customize both depth and layout to best fit your equipment and cables, ensuring that the rack suits your space.Make the most of your available spaceThe 8U rack wall mounting feature allows you to free up desk or floor space -- perfect for your SoHo (small office, home office) environment, server room or any other location with limited space available.Ensure a secure and hassle-free installationThe wall rack is constructed of solid steel to ensure a sturdy and safe mounting solution for your mission-critical equipment and with the wall mounting holes positioned 16" apart, it exactly matches standard drywall construction framework, to ensure simple and secure wall-stud anchoring.For hassle-free equipment installation, the rack features 10-32 tapped rails, so you can mount your equipment directly to the rail and avoid the hassle of using cage nuts.Save money, with a cost-effective, compact shipping packageThe wall-mount rack comes in a flat-packed box to reduce shipping volume, which significantly reduces your costs in shipping while also providing greater protection than offered by pre-assembled racks. Packaged efficiently, you can easily store and transport the rack for deployment at a later date or in a different location than where it's received.The WALLSHELF8U is backed by a StarTech.com lifetime warranty and free lifetime technical support.The StarTech.com Advantage

Cisco GRWIC-VA-DSL-B network card Internal RJ-11 Accessories

The Cisco Multimode VDSL2 and ADSL2/2+ GRWICs provide 1-port multimode VDSL2 and ADSL2/2+ WAN connectivity. In combination with the CGR 2010, this GRWIC provides high-speed digital data transmission between remote energy infrastructure and the central office (DSL access multiplexer [DSLAM]), usually located on the service provider premises. This capability helps enable the energy operations to take advantage of the business-class WAN connection features such as security, differentiated classes of service (QoS), and managed access with Cisco IOS ® Software over existing telephony infrastructure. These value-added features, along with the flexible manageability and reliability of Cisco IOS Software, provide mission-critical networking features that energy organizations need.

Cisco GRWIC-4G-LTE-EA modem Accessories

The Cisco Connected Grid 2G/3G/4G Multimode LTE GRWIC modules are designed for use with the Cisco 2010 Connected Grid Router (CGR 2010). These GRWICs provide second-generation (2G), third-generation (3G), and fourth-generation (4G) cellular technologies and are backwards-compatible with older technology. Suitable as both primary and secondary WAN connections, these GRWICs support the latest 4G standards (3GPP Release 8 LTE) as well as 3GPP and 3GPP2-based 3G and 2G access technologies, and transparent handoff from 2G/3G to 4G LTE.These GRWICs support the 3GPP2 technologies of Code Division Multiple Access (CDMA) such as CDMA 1xRTT, Evolution-Data Optimized, or EVDO Rev 0 and Rev A. They also support the 3GPP technologies of the Global System for Mobile Communications (GSM) and Universal Mobile Telecommunications Systems (UMTS) such as GSM, EDGE, or Enhanced Data Rates for Global Evolution; General Packet Radio Service (GPRS); and High-Speed Packet Access (HSPA), which included High-Speed Uplink Packet Access (HSUPA) and High-Speed Downlink Packet Access (HSDPA). In addition, the new LTE 4G technology is supported.

Cisco GRWIC-1CE1T1-PRI network switch module Accessories

The Cisco® Connected Grid portfolio of solutions is designed specifically for the harsh, rugged environments often found in the energy and utility industries. These solutions include the Cisco 2010 Connected Grid Router (CGR 2010) and the Cisco 2520 Connected Grid Switch (CGS 2520), which have been designed to support the communications infrastructure needs of the energy delivery infrastructure across the generation, transmission, and distribution sectors. This infrastructure includes the utility- and customer-owned energy infrastructure, such as substation applications supporting electrical transmission and distribution, renewable generation, oil and gas, water, distributed generation, co-generation, and trackside operations. The infrastructure also includes the communications infrastructure for delivery applications such as transmission pipelines, distribution mains, and service lines for oil and gas and water. Designed for highly secure, reliable, and scalable infrastructure, the CGR 2010 and CGS 2520 are an ideal platform to support Smart Grid and other energy delivery infrastructure needs of customers. These ruggedized products have been extensively tested and are KEMA certified to meet the challenging substation compliance standards including IEEE 1613 and IEC 61850-3.The Cisco Channelized T1/E1 and ISDN PRI Rugged WAN interface card (GRWIC) modules are designed for use with the Cisco 2010 Connected Grid Router (CGR 2010). This rugged router platform is optimized for the harsh conditions common in connected energy applications worldwide. The Cisco Channelized T1/E1 and ISDN PRI Grid Router WAN Interface Cards (GRWICs) combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI) in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. The Cisco CGR 2010 supports a one- and a two-port version of the T1/E1 module (Figure 1) in a single-wide GRWIC. The different versions help enable customers to deploy different port densities, depending on wide area network needs in connected energy network locations.The modules can be used in T1 or E1 networks and are selectable by software configuration. The integrated channel service unit/data service unit (CSU/DSU) function allows customers to consolidate customer premise equipment (CPE). The modules support balanced and unbalanced E1 connectivity and conform to the G.703 and G.704 standards for unframed and framed E1 modes.

GRWIC-ISDN-1B-S/T= Accessories

HX-MSWS-19-DC16C Accessories